News - October 1, 2021
Pipework Restoration
![](https://www.georgegreen-uk.com/wp-content/uploads/2021/10/Untitled-design-19-1024x683-1.jpg)
We were recently approached by a Customer working on a UK water treatment site to restore several pieces of degraded pipework which had been removed from a Water Board site. So in conjunction with our coating specialist Northpoint Ltd we carried out the following pipework restoration works.
Treatment
For the pipework restoration each pipe was shot blasted in the booth, taking a little longer than usual due to the build up of rust over the years. They were then preheated in the oven and dipped in the fluidised bed. At over 3m in length, the pipes were turned over by the crane and double dipped ( dipped from each end to create full coverage). The pipes were then left to cool and remedial work carried out before being banded together and prepared for collection from the customer.
Water Treatment Pipe Restoration: George Green – Northpoint Ltd
George Green (Keighley) Ltd | Water Projects (waterprojectsonline.com)
We predominantly serve the water industry, supplying all aspects of work including:
- Carbon or Stainless Pipework: Firstly steel rising main pipework is a core product, comprising flanged spools to customer specifications. Secondly steel water pipe fittings which includes fabricated duckfoot and lobster back bends. Thirdly we can fabricate a competitive range of bespoke tees, reducers and manifolds as an alternative to ductile iron pipework.
- Bridge Scrapers: The rotating half bridge scraper installation includes, bridge, centre steel tripod, end carriage, diffuser drum and scraper assembly. The half-bridge scraper rotates about a central pivot and the outer end comprises the end carriage which carries the bridge drive and wheel assemblies.
- Pressurised Storage Containers: We produce a range of pressurised storage and transport containers. And these are for the safe handling of very expensive spare parts (turbine rotors and pump impellors).
- Galvanised Steelwork: Our workforce includes fully trained fabricators and coded welders. We work to the highest standards to make sure our fabricated metal products and structures meet all specified tolerances. We design, supply and install galvanised steelwork. This includes installation of steel handrails.